This Agilent/Varian TwisTorr 304 FS Turbomolecular Pump Agilent no. Manufactured in Italy, this specific model has an ISO-100 primary inlet flange, a KF40 split flow inlet, a KF25/NW25 outlet flange, a KF16 vent adapter, and is set up for water or air cooling. However we are happy to reconfigure it to -64010/-64060/ or other specs for FREE on request. Simply specify whether you want a KF 16 or KF 24 inlet, a purge valve inlet or blanking plug, a vent valve inlet or blanking plug, etc. Specs list maximum a pumping speed of 250L/sec, and an ultimate vacuum of better than 1×10^-10. The pump includes everything you need to get going immediately including a Varian 9698973M015 controller, along with a power cable, a serial to USB cable for use with Agilent’s free A-Plus vacuum control and monitoring software, as well as a prefabricated interlock/Start/Soft Start connector which allows you to control the pump directly without the need for a PC straight out of the box. It has been fully tested and is running great (see photos). The pump has recently received a full overhaul including a cosmetic cleanup, ultrasonic cleaning of internal components, top bearing replacement, bottom bearing cleaning and relubrication, bearing isolation ring upgrade, and an o-ring regreasing/replacement. It is in excellent working condition – runs quiet, smooth, and cool with very low current draw, comes up to speed in well under 5 minutes, and pulls a very good vacuum. Our test setup is FAR from UHV, but even after only 15 minutes of operation (and after days of sitting at atmospheric pressure), it passed 10^-7 mbar with no issue and was still dropping at the end of the test. All in all, this is a very nice and happy pump in beautiful condition that is sure to give you years of excellent service. This is the BEST DEAL ANYWHERE for a fully overhauled, like new, guaranteed Agilent TwisTorr 304 FS in spectacular running condition WITH controller so don’t miss out! NOTE: this listing does NOT include any accessories other than the following: Turbo Controller, Power Cord, USB/Serial adapter, and prefabricated start/stop/interlock connector. The pressure gauges, flanges, foreline pump, hoses, clamps, PC, etc. Pictured in some photos are for demonstration purposes only. To order pump ONLY without controller or accessories, go to our other listings.
Tags: agilent, controller, guaranteed, pump, turbomolecular, twisstorr, x3500-
In: